Archive for the ‘Computer Recycling’ Category
Electronic waste recycling program falls short of lawmaker’s expectations
March 22nd, 2011 | 
Author: By Emily Long 05/10/2010
Contractors responsible for recycling government computers and other electronic equipment aren’t held accountable to certification standards and environmental regulations, according to the leader of a House oversight committee.
In letters last week to Environmental Protection Agency Administrator Lisa Jackson and General Services Administration chief Martha Johnson, House Oversight and Government Reform Committee Chairman Edolphus Towns, D-N.Y., expressed concern that the two agencies aren’t doing enough to ensure the safe disposal of old computers and other equipment used by the government.
“I am concerned that the [GSA Federal Supply Schedule] does not adequately direct agencies toward companies with the highest e-waste recycling standards,” Towns wrote. “I am also concerned that there may be a lack of direct oversight of e-waste recycling to ensure proper waste handling.”
According to the Office of the Federal Environmental Executive, computer hardware has an average lifespan of seven years, but federal equipment typically is recycled after just three years. The government disposes of an estimated 500,000 computers annually. A 2008 Government Accountability Office audit found, despite EPA regulations, the companies responsible for e-waste often export electronics to developing countries, which dispose of them in unsafe conditions.
EPA has developed a responsible recycling, or R2, certification process for the safe disposal of e-waste. But only two of the 60 waste recycling contractors on GSA’s Schedule 899-5 meet the R2 criteria, according to Towns.
Full Article: http://www.nextgov.com/nextgov/ng_20100510_8749.php
Posted in 
Tags: 
Recycling industry heading for change
Ben Cubby Environment Editor
November 4, 2010
With the speed of of a melting glacier, Australia’s recycling industry is grinding towards its long-promised national scheme for recycling old computers, televisions and mobile phones, as well as bottles and cans.
There were pledges of future legislation and further studies, but few tangible results to report so far, at a meeting of state and federal environment ministers in Sydney yesterday.
The quick action on a national “cash for cans” recycling scheme, flagged by former Environment Minister Peter Garrett as last year’s meeting, will have to wait until next year while a review into its impact on industry is completed.
Legislation to underpin a scheme for recycling electronic waste will not be in place until July next year. The ongoing delays mean up to 200 million electronic items will now go into landfill over the next seven months instead of being recycled.
A scheme for recycling old tyes will be in place by November next year, while legislation for recycling packaging and limiting plastic bag use is now set down for March 2012.
The NSW Environment Minister, Frank Sartor, called for faster action.
“The TV and e-waste strategy is going far too slowly – there is a timetable that’s been proposed but it’s got to be expedited,” Mr Sartor said. “The wheels of COAG move very slowly and they need some WD40.”
Full Article: http://www.brisbanetimes.com.au/environment/conservation/recycling-industry-heading-for-change-20101104-17fzx.html
New York becomes 23rd state to adopt e-waste recycling law
Almost halfway there: New York becomes 23rd state to adopt e-waste recycling law
By Heather Clancy | June 11, 2010, 12:10pm PDT
Summary:
If you live in New York state and have neglected your spring cleaning, you may want to hold onto your old electronics doo-dads a bit longer: Your state just passed what some are calling the “most progressive” electronics waste recycling law in the country.
There are a couple of things that make this law unique (New York obviously learned from other progressive states on this matter, including Washington and Minnesota:
- Technology manufacturers will be required to reuse a certain amount of electronic waste each year. The amount that they have to reuse will be based on market share.
- Manufacturers that collect more stuff than they have to, will get recycling “credits” for doing so. If a manufacturer doesn’t reach its quota, it faces fines.
- Consumers have five years to get used to this idea: After Jan. 15, 2015, they will be prohibited from dumping computers, printers, televisions, DVD players, MP3 players and such into landfills. Big appliances such as refrigerators or microwaves, however, are exempt.
Link to Article:
National Post Article
Friday, August 21st 2009
Finally, a place for unwanted microwaves to end their lives with dignity
Got an old microwave that you want to toss? Chucking it with the rest of the trash will result in a slow death in a landfill. And don’t think of putting it out with the recycling – no such program exists in Canada. (Consumers have to pay to have their old microwaves recycled.) What’s an environmentalist to do?
Source: nationalpost.com
GEEP’s Ewaste Processes
E-Waste Solutions Inc.
The Hamos ERP recycling system is designed for economic recycling of WEEE scrap (Waste Electric and Electronic Equipment). The materials are processed into highly concentrated metallic and non-metallic fractions. The ERP system will give you a maximum recovery of marketable metal concentrates at lowest recycling cost.
The Hamos ERP I recycles 2,000 … 4,000 kg/hr of heavy WEEE-scrap like
- Computers/photocopiers
- Consumer electrics and electronics
- Household appliances and many more
The Hamos ERP II recycles 1,000 … 2,000 kg/hr of
- Printed circuit boards
- Light electronics
- Shredder residues and many more
With the Hamos ERP system you will achieve
- Selected material fractions like: motors, transformers, stainless steel, coarse metals, printed circuit boards, coarse plastics etc.
- Highly concentrated non-ferrous fractions (containing copper, aluminum and precious metals like gold, silver, platinum, palladium etc.)
- Ferrous products
- Non-metallic products (mostly metal-free fine plastics, epoxy, glass fibers, ceramics, dust etc.)
Details
The Hamos ERP recycling plant is specifically designed for the low cost recycling of approx. 2,000 kg/hr up to 4,000 kg/hr of heavy WEEE scrap and 1,000 … 2,000 kg/hr of light WEEE scrap into clean metallic and non-metallic fractions.
With Hamos ERP I non-disassembled electric items are shredded by a special heavy duty crusher. Coarse ferrous and non-ferrous parts are taken out automatically. Additional hand-picking stations allow to sort out additional valuable fractions like motors, transformers, stainless steel parts etc.
The Hamos ERP II is designed to process “light” electric and electronic materials and shredder residues from ERP I or similar sources. A heavy duty hammer-mill grinds the material to achieve separation of inert materials and metals. In addition wires and other interlocking materials are conglobated for better separation. The ground material is subsequently screened and de-dusted. From this fraction the valuable metal fraction is separated, using electrostatic and gravimetric separation technologies.
Advantages of the ERP System:
- High recovery rate of metals (including precious metals)
- Clean metallic concentrates can be sold easily
- Recovery of steel, copper and aluminum
- Clean non-metallic fractions
- Heavy duty system, easy to operate
- Economic solution with low recycling cost
- Dry recycling process, no environmental hazards
- Reduced material size saves shipping cost
- Certified destruction of WEEE production waste
- Special designed ERP systems for higher capacities are also available
Products which cannot be recycled (by ERP):
- CRT monitors
- Electronic products with toxic contents
- Products with wet and oily fluids
Technical Data
Energy Consumption (400 Volt, 3 phase):
- ERP I: approx. 350 kW
- ERP II: approx. 300 kW
Achievable Throughputs:
- ERP I: 2,000…4,000 kg/hr
- ERP II: 1,000…2,000 kg/hr
Required Space:
The complete Hamos ERP I/II plant (without stock for raw and finished products, runways for fork-lifts etc.) requires a minimum space of 20 x 50 m. The required minimum ceiling height is 10 m.
Other Equipment:
In addition Hamos supplies the following systems for WEEE scrap recycling:
- CSS for CRT monitor recycling
- KWS electrostatic separators for fine metal recovery
- EKS electrostatic separators for plastic-plastic sorting
- ECS eddy current separators
- Magnets (permanent and electro-magnets)
